Original German WWII M40 Single Decal Army Heer Steel Helmet with Damaged Liner - EF62

Original Item: Only One Available. This is a very nice all original example of a German Model 40 Steel helmet, as issued to the Wehrmacht Heer (army). It shows lovely period service wear in the form of chipped paint and oxidation on the top of the helmet. It most likely saw a good amount of service during the war, but does not appear to have been repainted at any point during the war, or after. This stamped sheet steel construction helmet retains about 65% of its original paint, which actually looks to be lightly textured early war Apfelgrün (apple green), replaced later by the more blue gray panzergrau (armor gray). The left side of the helmet features a nice Heer eagle decal, which is retained about 85% with overall light wear. This is a very nice example of the M40 helmet, with a great service used look!

The reverse, interior, neck guard apron is batch number stamped 1345, and the interior, left side, apron has a stamped manufacturer's code and size, EF62 indicating that indicating it was manufactured by Emaillierwerke AG, of Fulda Germany in size 62. This is a nice smaller size that can accommodate liners from 54cm to 55cm or US 6 3/4 to 6 7/8. There is also G-415 in white paint on the inner rear skirt, possibly an issue number.

All three original liner retaining pins are intact with the original paint very well retained. The interior of the helmet still has an original M31 leather liner, however it is definitely damaged and worn, with only three of the original eight leather "fingers" still intact. The others have all torn off, and the end portions are still stuck on the intact top tie string. The mid war galvanized steel band is marked with 62 n.A. / 55, indicating that it is a size 55 liner for a size 62 shell. The original chinstrap is unfortunately completely missing.

Overall a very nice M40 Single Decal Heer Army helmet, with a great patina! M40 helmets of this quality are always the hardest to find on the market. This is an item that will only continue to appreciate in value over time.

The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.

These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.

The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.

The last wartime upgrade to the standard helmet took place on 6 July 1942 at the request of the Army High Command. The rolled edge found on M1935 and M1940 helmets was discontinued as a measure of economy. On 1 August 1942 the first M1942 helmets were placed into production, and this was the model produced until late in the war, when most factories were captured or stood idle due to material shortages.