Original U.S. Civil War M1860 Spencer Carbine Issued to 4th Kentucky Mounted Infantry and Later Reissued for Indian Wars - Serial 26706

Original Item: Only One Available. This is a genuine U.S. Civil War Spencer Model 1860 Repeating Carbine, which has definitely led a long and interesting life! It looks to have seen service during the U.S. Civil war, and then was one of 11,000 Spencer Carbines refit for a Stabler Cut-off and the .50 Government Rimfire cartridge during the 1867-1874 period for use in the Indian Wars by various cavalry units. All parts are completely correct, and it looks to have seen long use during its military service, and possibly on the frontier afterwards. This has given it a fantastic patina and "been there" look, which looks great in any collection.

The carbine is marked on the rear receiver with Serial number of 26706, indicating early 1864 manufacture. During the Civil war, approximately 50,000 Spencer Model 1860 Carbines were delivered to the U.S. Army during the period October 9, 1963 to April 17, 1865. These began with serial number 11,001 and ran to approximately 62,000. This example came to us with some research records, indicating that the carbine was issued during the Civil War to Company "B" of the 4th Kentucky Mounted Infantry! We very rarely get guns with verified issue information during the war! The entry is dated to March 1865, most likely when it was turned in as the war was winding down towards its conclusion.

The carbine comes complete with its original 7-Shot tube magazine stored in the butt, this was the gun that advertised, "Load on Sunday and Shoot all week". Maker’s markings and patent information are legible on top of the receiver, with the top and middle lines a bit faint:-

SPENCER REPEATING-
RIFLE CO. BOSTON MASS.
PAT'D MARCH 6 1860

Extensively used at Gettysburg, this really is a Civil War Classic!

After the Civil War, many Spencer Carbines and Rifles altered and modified at US armories and many remained in service through the early 1870’s for use during the Indian Wars. The primary alterations were the addition of the Stabler “Cut-Off”, and lining the barrels to accommodate the new US military standard metallic cartridge, the .50 Government Rim Fire (aka 56-50 Spencer). This allowed the U.S. to standardize the rimfire ammunition they were issuing at the time. As the Spencer design originally utilized a .52" caliber barrel, which was too large for this, all were sleeved to the new, smaller, .50 caliber, which was rifled with 3 wide grooves instead of the Civil War era 6 narrow grooves. Only about 11,000 of the 50,000 Civil War purchased Spencer carbines were altered between 1867 and 1874, so they are not very commonly encountered.

This example is definitely one of those that was converted and reissued for Indian Wars service. It has the Stabler "Cut-off", one of the first systems on a repeating rifle to allow use in single shot mode, later used in many bolt actions designs. It still retains the 22 inch barrel of a Model 1860, however the bore measures out to just over .50", and it has wide three groove rifling. Close examination of the muzzle shows that the barrel was drilled out and a sleeve inserted and then brazed in place. These were utilized by numerous Cavalry Regiments during the Indian wars, including the 9th and 10th Cavalry.

The stocks are in very good condition, with the expected light wear of age and service, as shown. They appear to possibly have been swapped out when the carbine was reissued, as they show very little wear when compared to the metalwork of the carbine. There is no major damage such as chunks or cracks, making this a really nice set of "furniture".

The metalwork overall is in very nice condition, showing a lovely gray polished patina overall from decades of cleaning. There is not any major oxidation we can see, just a bit of light peppering in areas. We checked the bore, and the 6 groove rifling is still in very good condition, showing clear lands and grooves, with a partly bright finish. There is some wear, as well as some fouling and light oxidation in the grooves, but for a black powder era gun this is definitely a really great bore! The carbine functions well, and we did not notice any issues with cycling, with the Stabler "cut-off" working correctly. We did not try it with any dummy ammo to see if it could still feed. The magazine looks to be functional, and comes out and goes back in without issue. The rear and front sights are in great shape and fully functional.

Overall a great example of an iconic Civil War Weapon, issued to the 4th Kentucky Mounted Infantry during the war, and later refit at arsenal for Indian Wars use. This carbine has passed the test of time with flying colors! Perfect for any collection, and ready to research and display!

Specifications-

Years of Manufacture: early 1864
Caliber: .56-50 Spencer rimfire / .50 Government Rimfire
Ammunition Type: Rimfire Cartridge
Barrel Length: 22 inches
Overall Length: 39 inches
Action: Lever Action with Manual Hammer
Feed System: 7 Round Tube Magazine

History and overview of the Spencer repeating rifle and carbine-

The Spencer repeating rifle was a manually operated lever-action, repeating rifle fed from a tube magazine with cartridges. It was adopted by the Union Army, especially by the cavalry, during the American Civil War, but did not replace the standard issue muzzle-loading rifled muskets in use at the time. The Spencer carbine was a shorter and lighter version.

The design was completed by Christopher Spencer in 1860, and was for a magazine-fed, lever-operated rifle chambered for the 56-56 Spencer rimfire cartridge. Unlike later cartridge designations, the first number referred to the diameter of the case ahead of the rim, while the second number referred to the diameter at the mouth; the actual bullet diameter was .52 inches. Cartridges were loaded with 45 grains (2.9 g) of black powder.

To use the Spencer, a lever had to be worked to extract the used shell and feed a new cartridge from the tube. Like the Springfield Model 1873 Trapdoor Rifle, the hammer had to be manually cocked in a separate action. The weapon used rimfire cartridges stored in a seven-round tube magazine, enabling the rounds to be fired one after another. When empty, the tube could be rapidly loaded either by dropping in fresh cartridges or from a device called the Blakeslee Cartridge Box, which contained up to thirteen (also six and ten) tubes with seven cartridges each, which could be emptied into the magazine tube in the buttstock.

There were also 56–52, 56–50, and even a few 56–46 versions of the cartridge created, which were necked down versions of the original 56–56. Cartridge length was limited by the action size to about 1.75 inches, and the later calibers used a smaller diameter, lighter bullet and larger powder charge to increase the power and range over the original 56–56 cartridge, which, while about as powerful as the .58 caliber rifled musket of the time, was underpowered by the standards of other early cartridges such as the .50–70 and .45-70.

At first, conservatism from the Department of War delayed its introduction to service. However, Christopher Spencer was eventually able to gain an audience with President Abraham Lincoln, who subsequently invited him to a shooting match and demonstration of the weapon. Lincoln was impressed with the weapon, and ordered that it be adopted for production.

The Spencer repeating rifle was first adopted by the United States Navy, and subsequently adopted by the United States Army and used during the American Civil War where it was popular. The South occasionally captured some of these weapons and ammunition, but, as they were unable to manufacture the cartridges because of shortages of copper, their ability to take advantage of the weapons was limited. Notable early instances of use included the Battle of Hoover's Gap (where Col. John T. Wilder's "Lightning Brigade" effectively demonstrated the firepower of repeaters), and the Gettysburg Campaign, where two regiments of the Michigan Brigade (under Brig. Gen. George Armstrong Custer) carried them at the Battle of Hanover and at East Cavalry Field. As the war progressed, Spencers were carried by a number of Union cavalry and mounted infantry regiments and provided the Union army with additional firepower versus their Confederate counterparts. President Lincoln's assassin, John Wilkes Booth was armed with a Spencer carbine at the time he was captured and killed.

The Spencer showed itself to be very reliable under combat conditions, with a sustainable rate-of-fire in excess of 20 rounds per minute. Compared to standard muzzle-loaders, with a rate of fire of 2-3 rounds per minute, this represented a significant tactical advantage. However, effective tactics had yet to be developed to take advantage of the higher rate of fire. Similarly, the supply chain was not equipped to carry the extra ammunition. Detractors would also complain that the smoke and haze produced was such that it was hard to see the enemy.

In the late 1860s, the Spencer company was sold to the Fogerty Rifle Company and ultimately to Winchester. With almost 200,000 rifles and carbines made, it marked the first adoption of a removable magazine-fed infantry rifle by any country. Many Spencer carbines were later sold as surplus to France where they were used during the Franco-Prussian War in 1870.

Despite the fact that the Spencer company went out of business in 1869, ammunition was sold in the United States up to about the 1920s. Later, many rifles and carbines were converted to centerfire, which could fire cartridges made from the centerfire .50–70 brass.

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.